3d printed headlights

jesusfreakxj

New member
I started printing parts and body's only thing is how do u get a clear finish on the headlights can anyone help or Direct me ty
 

xplan303ex

New member
Obviously you have to start with clear filament, and then sand, sand, sand, sand and sand with finer and finer grit. Then buff and buff and buff...

Quite a bit of work.

Sent from my Pixel 2 using Tapatalk
 

imthatguy

Putting it in "H"
You'll never get fully clear on FDM printers. You'd need to print on a resin printer to get anywhere close to clear results. Plus, please post in the appropriate place.
 
Top