sbg  

AE Element
Results 1 to 5 of 5

Thread: Help body gurus

  1. #1

    Default Help body gurus

    I have been using a Jeep jk body on my Remo 1093st ( honcho knockoff) but the body sits too high. It has been bugging me for awhile and now that I'm locked in I have been watch SBG and Harley on YouTube and am amazed. I want to lower the body and wanted to move the motor forward but since it's a knockoff there are no kits and I would need to swap out the transmission plus this and that so price starts to climb. I have already cut the console and rebuilt it but it's still not low enough. Any ideas...I could cut into the seats but I think that would look weird.

    Sent from my GM1917 using Tapatalk

  2. #2
    Join Date
    Jul 2010
    Location
    It no longer exists.
    Posts
    11,671

    Default

    You should look into the GCM motor relocation kit. He's a Vendor here and should be able to help you, provided your Remo is essentially the same as an SCX10.
    SBG OWNER YOUTUBE AXIAL AMBASSADOR GCM TEAM DRIVER VANQUISH KNIGHT CUSTOMS TEAM

  3. #3
    Join Date
    Apr 2020
    Posts
    170

    Default

    i think any scx 10 relocation kit's will work

  4. #4
    Join Date
    Aug 2019
    Posts
    97

    Default

    Cool looking interior on that.

    Cut across the floor joggle at the rear seat, firewall, and the rocker panel area.
    Raise front seats to flatten floorboard.
    Rebuild the cut out areas
    Highspeed tool to 'soften' the trasitions, unless you want to hide mods as a Roll-cage.
    Apply texture paint or flocking to hide mods.

  5. #5

    Default

    yes its true

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •