sbg  

RPP Associated
Results 1 to 2 of 2

Thread: FlySky GTB3 and HW 1080 wont Calibrate help needed

  1. #1
    Join Date
    Feb 2019
    Posts
    23

    Default FlySky GTB3 and HW 1080 wont Calibrate help needed

    Hi, I’m having issues setting up my 1080 ESC with my FlySky GT3B , it won’t go into the calibration mode, when I turn the ESC on and release the set button it will just beep.
    I have tested the transmitter and receiver with another ESC and it all works fine. I have looked into other forums and have tried their suggestions to test in ch1 and use the steering wheel and this works fine. Ch 2 as mentioned won’t calibrate and had no forward response but reverse will just take off.
    Hoping for some help please

  2. #2
    Join Date
    Feb 2019
    Posts
    23

    Default

    problem solved, i saw a harley design youtube where he got the 2 beeps by doing the brake first then forward and got the 3 beeps. then reversed the the transmitter channel, all done

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •