sbg  

Pro-Line
Results 1 to 3 of 3

Thread: SCX10II front geometry question

  1. #1
    Join Date
    Aug 2019
    Posts
    50

    Default SCX10II front geometry question

    To preface, I do not yet have a 3D printer and have zero brazing ability. The goal is to be able to mount shocks shorter than 90mm on SCX10II. Preferably the ECX 75mm. With those two considerations in mind, what is the easiest solution, in anyone here's opinion, considering that the darned panhard mount is tied to that shock hoop. TL;DR Anyone know of an STL etc of modified SCX10ii hoops to accept shorter shocks than 90mm?

  2. #2
    Join Date
    Jul 2010
    Location
    It no longer exists.
    Posts
    11,673

    Default

    You could just get some of those shock keys to lower the mount, and you're done.
    SBG OWNER YOUTUBE AXIAL AMBASSADOR GCM TEAM DRIVER VANQUISH KNIGHT CUSTOMS TEAM

  3. #3
    Join Date
    Aug 2019
    Posts
    50

    Default

    now that is way too simple/easy. whoops

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •