sbg  

AE Element 2
Results 1 to 8 of 8

Thread: Xr10 mod for scx10?

  1. #1
    Join Date
    Oct 2014
    Posts
    229

    Default Xr10 mod for scx10?

    Hey.

    I am looking for a clear report do it youreself for an xr10mod for the scx10 1.
    does anyone know where I can find a clear report with photos?

    Regards Johan.

  2. #2
    Join Date
    Oct 2014
    Posts
    229

    Default

    No one?

  3. #3
    Join Date
    Dec 2017
    Posts
    1,177

    Default

    I suspect most people run 10iis now, try searching or googling, I don't know but I'm sure I've read some walkthroughs at some point...

  4. #4
    Join Date
    Jan 2016
    Location
    FortCrawlinsCO
    Posts
    100

    Default

    Beeftubes
    Xr universals
    Wraith knuckles and c hubs
    Longer links
    Cut the end off the housing insert beeftubes then install hubs and knuckles and links. Trim universal to fit depending on what width you choose then flatten out the end like it was before you trimmed it short.. I don't recall exactly since I did an Xr narrow mod on mind to keep it same as the rear on my original scx10ii axles

  5. #5
    Join Date
    Oct 2014
    Posts
    229

    Default

    Quote Originally Posted by odomandr View Post
    Beeftubes
    Xr universals
    Wraith knuckles and c hubs
    Longer links
    Cut the end off the housing insert beeftubes then install hubs and knuckles and links. Trim universal to fit depending on what width you choose then flatten out the end like it was before you trimmed it short.. I don't recall exactly since I did an Xr narrow mod on mind to keep it same as the rear on my original scx10ii axles
    Thanks!

    are the beeftubes necessary?

  6. #6
    Join Date
    Jan 2016
    Location
    FortCrawlinsCO
    Posts
    100

    Default

    I dont think so but the weight helped and my plastic was worn...

  7. #7
    Join Date
    Oct 2014
    Posts
    229

    Default

    Quote Originally Posted by odomandr View Post
    I dont think so but the weight helped and my plastic was worn...
    all right. thanks a lot for the information.

    Regards Johan.

  8. #8
    Join Date
    Jun 2016
    Location
    Macungie PA
    Posts
    1,083

    Default

    Best bet are beef Tubes.

    Wes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •