sbg  

RPP UMG
Results 1 to 4 of 4

Thread: Nylint vintage. Build. Opinions please

  1. #1
    Join Date
    May 2018
    Posts
    127

    Default Nylint vintage. Build. Opinions please

    So ive been thinking about turning a nylint stamped metal truck into a crawler . I figure the conversion should be ez enough. They have real patina. Is it to far from scale ? Whats the forums thoughts . Ive searched the forum with no hits. What doy yall think.? Kinda looks narrow but would. Be ok with those semi rockwell 2 1/2 ton looking axles i seen on the rc4wd store. Suggestions please

    Sent from my LGLS991 using Tapatalk

  2. #2
    Join Date
    Aug 2014
    Location
    Smithfield, RI USA
    Posts
    1,993

    Default

    These are pretty tiny bodies. This is why they are not used very often.

    As for axles, Losi MRC/Vaterra slickrock and perhaps that new team associated ford truck both have small narrow axles that might work.

  3. #3
    Join Date
    May 2018
    Posts
    127

    Default

    Quote Originally Posted by Small Factory View Post
    These are pretty tiny bodies. This is why they are not used very often.

    As for axles, Losi MRC/Vaterra slickrock and perhaps that new team associated ford truck both have small narrow axles that might work.
    Thanks. I looked into the slickrock axles seem they may work. You happen to know of any stamped steel bodys of the same vintage that may be a little bigger?

    Sent from my LGLS991 using Tapatalk

  4. #4
    Join Date
    May 2018
    Posts
    127

    Default

    Well my nylint tow truck arived and. Small factory. wow did i under estimate how small it was. So now my sun has a new lamp.

    Sent from my LGLS991 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •