sbg  

AE Element
Results 1 to 2 of 2

Thread: Trf 2 quarter elliptical rear suspension

  1. #1
    Join Date
    May 2018
    Posts
    127

    Default Trf 2 quarter elliptical rear suspension

    So springs are cut forward of front axle and aft of rear axle i removed the wedge from spring hanger as it was useless the leaf pack leafs go as follows to stop spring wrap. Small on bottom main in middle middle on top. Chino the leaf eyes. Replace. Hanger thru bolt with 3mm screw. And you have a front quarter elliptic suspension and also a rear quarter elliptic suspension the spring loaded shocks provide the lift and a lot of it over stock. The articulation is increased dramatically. Over stock. Using this in the front make it a bit wonky and i only recommend for the rear. But over all increased capabilities by 100% feel free to message me for more info

    Sent from my LGLS991 using Tapatalk

  2. #2
    Join Date
    May 2018
    Posts
    127

    Default


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •