sbg  

RPP UMG
Results 1 to 8 of 8

Thread: 3 Inch Roll Bars for RC4WD Blazer Pickup Conversions

  1. #1
    Join Date
    Jul 2017
    Location
    Concord, NC
    Posts
    492

    Default 3 Inch Roll Bars for RC4WD Blazer Pickup Conversions

    I have designed a couple of old school 3 inch roll bars that work with RC4WD Blazer pickup conversions. There is a single tube version and a double tube version. Both feature two mounting tabs on the top that can be used for mounting lights with M3 screws.

    Single tube version:

    https://www.shapeways.com/product/YK...ionId=65443211

    Double tube version:

    https://www.shapeways.com/product/CB...ionId=65455422


    Here are some pics of the single tube version on my personal build:








    Installation is simple. Put the bar in the location you want to install it and find the center of the mounting flange using a couple of marks. I would recommend starting with the front two legs first, then once they are mounted with screws, locate the rear legs and mark them.






    Drill the center mark with a 1/8 inch (3.2mm) bit.




    Finally, attach the roll bar with (4) M3X8 screws from underneath. They will thread into the holes, but be careful not to over-tighten them.
    -Jeff
    Mod19RC Shapeways Store
    IG: @RexRacer19

  2. #2
    Join Date
    Feb 2013
    Location
    Val-des-Lacs Québec
    Posts
    673

    Default

    Really nice

  3. #3
    Join Date
    Jul 2017
    Location
    Concord, NC
    Posts
    492

    Default

    Quote Originally Posted by ericdegallargue View Post
    Really nice
    Thank you.
    -Jeff
    Mod19RC Shapeways Store
    IG: @RexRacer19

  4. #4
    Join Date
    Jan 2018
    Posts
    64

    Default


  5. #5

    Default

    Great job looks awesome... do you have any plans for some inner fenders also? scx10 ii /k5 Blazer

  6. #6
    Join Date
    Jul 2017
    Location
    Concord, NC
    Posts
    492

    Default

    Thanks. I may look into doing those since I did a set for the Hilux.
    -Jeff
    Mod19RC Shapeways Store
    IG: @RexRacer19

  7. #7
    Join Date
    Jun 2016
    Posts
    557

    Default

    I’d be very Keen on blazer bolt on wheel wells for the SCX10 chassis as well

  8. #8

    Default

    I am in the process of building A scx10 ii Blazer k5 build and be interested in any prototypes of inner fenders!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •