PDA

View Full Version : SCX10II front geometry question



rshackleford
02-17-2020, 06:56 PM
To preface, I do not yet have a 3D printer and have zero brazing ability. The goal is to be able to mount shocks shorter than 90mm on SCX10II. Preferably the ECX 75mm. With those two considerations in mind, what is the easiest solution, in anyone here's opinion, considering that the darned panhard mount is tied to that shock hoop. TL;DR Anyone know of an STL etc of modified SCX10ii hoops to accept shorter shocks than 90mm?

imthatguy
02-18-2020, 10:20 AM
You could just get some of those shock keys to lower the mount, and you're done.

rshackleford
02-18-2020, 02:03 PM
now that is way too simple/easy. whoops::awwcrap