PDA

View Full Version : SBG Dog Dish Hubcaps



imthatguy
11-17-2018, 09:16 AM
N00b and I developed these Chevy-inspired Dog Dish hubcaps for everyone that wants that vintage look on their trucks. Shown here in prototype form, these are printed via Shapeways for a smooth finish in laser sintered nylon. Tough, long lasting and full of detail, these have a 4mm hole on the back, designed to screw into the axle stub for a flush look with the wheel. We recommend the Gmade SR03 or VR01 wheels in 1.9 size for the right look.

We offer both the hubcap and locking hub versions.
https://imagizer.imageshack.com/v2/1024x768q90/923/GFqqh6.jpg (https://imageshack.com/i/pnGFqqh6j)
https://imagizer.imageshack.com/v2/1024x768q90/924/00SSyK.jpg (https://imageshack.com/i/po00SSyKj)

Pick up a set here:

https://www.shapeways.com/shops/sbg

avgatbest
11-17-2018, 04:34 PM
N00b and I developed these Chevy-inspired Dog Dish hubcaps for everyone that wants that vintage look on their trucks. Shown here in prototype form, these are printed via Shapeways for a smooth finish in laser sintered nylon. Tough, long lasting and full of detail, these have a 4mm hole on the back, designed to screw into the axle stub for a flush look with the wheel. We recommend the Gmade SR03 or VR01 wheels in 1.9 size for the right look.

We offer both the hubcap and locking hub versions.
https://imagizer.imageshack.com/v2/1024x768q90/923/GFqqh6.jpg (https://imageshack.com/i/pnGFqqh6j)
https://imagizer.imageshack.com/v2/1024x768q90/924/00SSyK.jpg (https://imageshack.com/i/po00SSyKj)

Pick up a set here:

https://www.shapeways.com/shops/sbg

Can you guys offer them in the smooth/smoothest detail plastic material(s) as well?

imthatguy
11-17-2018, 04:36 PM
We can, but the premium on that finish is very expensive. Doubles the cost when really, you could just sand them yourself. If there's a real demand, we'll offer it.

avgatbest
11-18-2018, 08:15 PM
We can, but the premium on that finish is very expensive. Doubles the cost when really, you could just sand them yourself. If there's a real demand, we'll offer it.

Doesn’t cost you anything, does it?

imthatguy
11-19-2018, 05:56 AM
Doesn’t cost you anything, does it?

No of course not, but it does cost the end user, and we're looking for value here. Considering it still has to be painted and detailed, why add another layer of cost when it really isn't necessary.

pardonmyn00b
11-19-2018, 01:53 PM
Got our first ones in today and they’re pretty perfect already.

https://uploads.tapatalk-cdn.com/20181119/533999049a29935e060793fee6b15a61.jpg