View Full Version : Trf 2 quarter elliptical rear suspension

Bent hinge pin
05-24-2018, 06:31 AM
So springs are cut forward of front axle and aft of rear axle i removed the wedge from spring hanger as it was useless the leaf pack leafs go as follows to stop spring wrap. Small on bottom main in middle middle on top. Chino the leaf eyes. Replace. Hanger thru bolt with 3mm screw. And you have a front quarter elliptic suspension and also a rear quarter elliptic suspension the spring loaded shocks provide the lift and a lot of it over stock. The articulation is increased dramatically. Over stock. Using this in the front make it a bit wonky and i only recommend for the rear. But over all increased capabilities by 100% feel free to message me for more info https://uploads.tapatalk-cdn.com/20180524/08a223f915d63d4b880ddd1d2e2182dd.jpghttps://uploads.tapatalk-cdn.com/20180524/30185636d9a4c06c371d0d033b04573b.jpghttps://uploads.tapatalk-cdn.com/20180524/d0b583fdd984a21f08a3e6d6765c3494.jpghttps://uploads.tapatalk-cdn.com/20180524/989f2e613f331d0521cb54db73344a35.jpghttps://uploads.tapatalk-cdn.com/20180524/5aa89169818b850a531008f3868e24d3.jpghttps://uploads.tapatalk-cdn.com/20180524/39093d1c72b3d63aff54bc73e842c7d8.jpghttps://uploads.tapatalk-cdn.com/20180524/675f294586a58d805166b868be3b4dcb.jpg

Sent from my LGLS991 using Tapatalk

Bent hinge pin
05-25-2018, 08:43 AM