PDA

View Full Version : Toyota Trekker Bed



pardonmyn00b
01-03-2016, 07:22 AM
I am very pleased to announce the latest product from Turks and Jerps! This piece will instantly convert your boring old Hilux cab into a Toyota Trekker! It will fit a Tamiya or RC4WD cab. It's designed utilize the stock taillights and rear marker lights from either RC4WD or Tamiya.

These beds are hand cast in resin. It has a similar weight and strength as an ABS/PS body. With that in mind these will vary slightly in thickness in some areas. I strive to make the best quality product I can within the limits of the materials I use. This is NOT for novice builders as it may require some modifications to fit your specific needs. Prior experience with hard body painting and assembly recommended.

$85 + shipping. Quantities are limited.

https://farm2.staticflickr.com/1581/24066574141_69a59e0803_b.jpg

https://farm6.staticflickr.com/5784/24123073886_be02968b0b_b.jpg

https://farm6.staticflickr.com/5719/23781354699_eda568a740_b.jpg

https://farm2.staticflickr.com/1507/24149152585_a810e0bc4a_b.jpg

https://farm6.staticflickr.com/5824/23781335089_8972460e4d_b.jpg

https://farm2.staticflickr.com/1653/24123036906_80f117b69a_b.jpg

Required to finish:
Light sanding, filling minor holes and dimples with filler (Bondo glazing putty or similar), washing and then priming and painting as any hard body. You will have to supply and cut your own window "glass". If you choose to model it as the full size vehicle, you will need to cut out the front wall of the bed. I'm leaving it filled in for extra strength while shipping and for the ones who don't plan on modeling an interior. The best tool I have found for cutting this material is a hacksaw.

OldfartRC
06-12-2017, 03:51 AM
NICE!!!

wsd
06-12-2017, 06:14 PM
So nice. Great work once again mr noob ;)

Jamifra
10-27-2017, 05:26 AM
i need one of theseeeee!!!!

pardonmyn00b
10-28-2017, 04:04 PM
Sorry, no longer producing them. Unless there are a few people who want one. Supplies are expensive.

Jamifra
11-01-2017, 09:34 AM
Sorry, no longer producing them. Unless there are a few people who want one. Supplies are expensive.

im down for 1! groupbuy??

avgatbest
11-02-2017, 02:11 PM
I’d buy.

Jamifra
11-03-2017, 06:52 AM
that 2 now! i bet that if a group buy thread is opened well get enough people so n00b can make a batch!

Jamithan04
11-10-2017, 05:50 AM
If you decided to do another run, I would for sure be in on a purchase

Jamifra
11-10-2017, 08:47 AM
If you decided to do another run, I would for sure be in on a purchase

1. Jamifra (1)
2. avgatbest (1)
3. Jamithan04 (1)

already on 3 units! let us know n00b!

pardonmyn00b
11-10-2017, 03:15 PM
Ok, you guys talked me into it!

Send me a message if you're interested in a preorder.

Jamifra
11-13-2017, 04:47 AM
Ok, you guys talked me into it!

Send me a message if you're interested in a preorder.

woooooo check you inbox!

pardonmyn00b
11-24-2017, 07:16 AM
First four beds are done and ready for shipping!

https://uploads.tapatalk-cdn.com/20171124/e64a13ee74cdffdc3effc645097aff80.jpg

imthatguy
11-24-2017, 09:40 AM
Like. And Greet.

1BadJeepBruiser
11-24-2017, 12:12 PM
Nice work Rich!

Jamifra
11-28-2017, 09:28 AM
:luv: :luv: