sbg  

RPP Axial 2018
Results 1 to 4 of 4

Thread: CC77's Scale Garage

  1. #1
    Join Date
    Dec 2014
    Posts
    20

    Default CC77's Scale Garage

    Hi everyone. I've been lurking on here a along time and I have to say the amount of talent and craftsmanship I've seen on here is unbelievable, it is well appreciated. I have decided to try my own scale garage as I am not new to RC, but I am new to crawling/scale trucks.
    I started with half of an old ping pong table, new legs, paint, and used 3/16" foam to divide up the table between myself, my son and my daughter. My son is building a scale gas station and my daughter is building a scale horse ranch.
    https://imgur.com/a/u4ZBLPq
    I started with an overhead garage door
    https://imgur.com/a/GQUT7Xe
    Then made a door
    https://imgur.com/a/sN0BDmi

  2. #2
    Join Date
    Dec 2014
    Posts
    20

    Default

    I used wheel hex pins with e-clips on each end of them for hinges on the garage door panels and I used a ball stud for a doorknob on the door.

  3. #3
    Join Date
    Dec 2014
    Posts
    20

    Default

    I got one small thing done today (worked 12 hours today Ha!). I made an electrical service panel out of 3/16" foam board, ran some conduit out of a coat hanger and mounted a light switch made out of the head of a zip tie.https://imgur.com/a/8RmsGlP

  4. #4
    Join Date
    Dec 2014
    Posts
    20

    Default

    I was able to get a few more things done this weekend. Holiday stuff going on means way less time to spend on scale stuff. I made a fire extinguisher out of a drive shaft from a slash for the body, antenna tube for the hose, a ball cup for the end of the hose and the end of a molly for the handle. Also hung a flag. https://imgur.com/a/IpCz8WF Next, I made an air compressor out of New Bright parts I had in the junk pile, old body posts, 3/16" foam board, window screen, an old license plate, a round servo horn, 16 guage wire and an air needle. I also made a single throw box.
    https://imgur.com/a/fOF76YX
    https://imgur.com/a/StzyppJ
    https://imgur.com/a/RY7hASu

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •