sbg  

RPP Associated
Page 10 of 10 FirstFirst ... 678910
Results 91 to 93 of 93

Thread: Fat Cat Speedster Jag Project

  1. #91
    Join Date
    Dec 2014
    Location
    In The Shop!
    Posts
    1,686

    Default

    Great job on that dash, very creative!

  2. #92
    Join Date
    Dec 2015
    Posts
    163

    Default

    Small progress and hopefully I am nearing the end of body details and can break it back down and sand and paint. I decided I was not satisfied with the finish of the rear bumpers and tried a technique of tubing bending by filling the tube with sand and bending it using a brake line tubing bender. Then emptied it, and flattened it a bit. I followed up by sanding out the back of the bend with a belt sander and between tapping here and there, sanding it all over and then buffing it out with some rubbing compound I have a it near finished. It fits over the present bumpers and looks better.

    The tubing before and after.
    IMG_2587.jpg

    The first configuration of the bumper
    IMG_2589.JPG

    The new bumper
    IMG_2590.JPG

    Another view. No photos in the kitchen because the kitchen needs cleaning - my next task, so I took the photos in my work space....which also needs cleaning!
    IMG_2591.JPG

  3. #93
    Join Date
    Dec 2016
    Location
    NoVa
    Posts
    864

    Default

    As always very well crafted.

Page 10 of 10 FirstFirst ... 678910

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •