Nissan Titan prerunner style - hybrid scale hammer
I was always a big fan of prerunner trucks or trophy truck style trucks and as i got a titan body from my friend Daniels i startet thinking about to build a prerunner style scaler with twinn hammer ifs front and a scale frame from Team Hrcct.
I want to create a rc which is good in scaleruns, bashing and u4 races. First test run i the Austrian scale series was really succesfull und very very fun to drive this little monster.
It runs on 3s with 2 gears and a 1800kv tekin roc with a tekin rs gen 2 speed Controller.
I started with this frame and mounted a wraith skid plate in between.
Chris, alias neon freak (known for the G6 Chris challange) helped me with the install from the ifs axle, cause with 2 hands its not that easy to handle it.
First thoughts was too use a scx10 rear axle, but what should i do with a half twinnhammer, so i used also the rear axle and the 2 gear transmission.
The really best on this build is now the ground clearance in the front and in the middle of the chassis.
I used long shocks in the rear to get the real prerunner style in jumps and so funny stuff.
now some pics from the really unfinished project yet, but there is still mire to come.
Ohh, i also did some body work too
I seen the car!
It is absolutly amazing that it can be both - a "TRIAL" and "GO FAST" Rig - and have a hardbody!
Very much looking forward to see where this on goes.
This is really cool! Wowsers! Regards Jens
Scale Virus infected!
Great looking rig. Lots of innovation going on here!
Love that it's a hard body. Most folks would probably opt for Lexan for the style of driving.
Last edited by imthatguy; 06-03-2015 at 04:27 AM.
SBG OWNER YOUTUBE AXIAL AMBASSADOR GCM TEAM DRIVER VANQUISH MAD MOOSE
Thank you guys! I will ad some lightstuff this evening!
So put your sunglases on when you read my next posting ;-)
Mhhh, too less time to install the lights today, more important to get ready for the scalecomp weekend in Austria. Some scaleparts for the points and finished one car - now i have to get the u4rc car ready also for the weekend.
looks great, What paintjob is comming on it
Good question! Next question please ;-)
I am too far away from painting now, we will see - wintertime is painting time maybe
New wheels from Duuuude - now i have 230mm of width in the front and 225mm on the rear axle
Should be perfect for our scale series in Austria
Ohhh, and i installed some baja led light system - looks cool with the flashing blue and orange