sbg  

RPP Axial 2018
Page 1 of 12 1234511 ... LastLast
Results 1 to 10 of 120

Thread: GCM's Multi-Stage SCX-10 Buildup - Stage 5

  1. #1
    Join Date
    Feb 2008
    Location
    Glued to a CNC Machine
    Posts
    5,416

    Default GCM's Multi-Stage SCX-10 Buildup - Stage 5

    HEy, all.
    Many of you have seen these falling out of trucks and off buses and out of airplanes recently: Boxes with Truck pictures on them.
    Well, I found this box up on a shelf in a store. NOt very original, but that's where I found it.

    Last edited by generis; 11-06-2012 at 08:51 AM.

  2. #2
    Join Date
    Jun 2011
    Location
    Duff Gardens
    Posts
    5,858

    Default

    It's upside down. Did you get it from an Australian store?
    SBG Junior Vice President RC4WDCASTLEGCM

  3. #3
    Join Date
    Feb 2008
    Location
    Glued to a CNC Machine
    Posts
    5,416

    Default

    Yeah, I drove down to pick it up this morning. And the really weird part is that when I was assembling it, I followed the instruck-shins perfectly, but it came out with extra servos and other strange things, like silver wheels. Not sure what happened to the black ones, but these are fine too.



    Last edited by generis; 10-14-2012 at 06:32 PM.

  4. #4
    Join Date
    Jul 2010
    Location
    It no longer exists.
    Posts
    10,564

    Default

    That truck is nice, but that box is off the shelf!

    Why so many servos? Is it a servo to turn the servo?

    I also like tombstones.
    SBG OWNER YOUTUBE AXIAL AMBASSADOR GCM TEAM DRIVER VANQUISH KNIGHT CUSTOMS TEAM

  5. #5
    Join Date
    Feb 2008
    Location
    Glued to a CNC Machine
    Posts
    5,416

    Default

    Well, I was playing with all the TX buttons on my GT3B radio, and suddenly the truck took off like a rocket! It's almost like it has 2 speeds! I think I want to do some adjustments to the thing already. It's fun, but not up to my super-wow standards. I think I'm going to mod it all over the place this week. Wish me luck!

  6. #6
    Join Date
    Jun 2010
    Location
    Wasaga beach, Ontario
    Posts
    2,065

    Default

    Good luck

  7. #7
    Join Date
    Mar 2008
    Location
    Uppper Riverbank
    Posts
    1,655

    Default

    Me too.

  8. #8
    Join Date
    Feb 2008
    Location
    Glued to a CNC Machine
    Posts
    5,416

    Default

    Well, I'll have a nice juicy update before week's end. A bunch of stuff in the works!

  9. #9
    Join Date
    Jun 2011
    Location
    Duff Gardens
    Posts
    5,858

    Default

    That is quite interesting how yours came with extra parts. Mine did too. Some pieces that allow me to mount my transmission up front and a transfer case for the middle. Very odd.

    Those wheels are much finer than the ones that come with it.
    SBG Junior Vice President RC4WDCASTLEGCM

  10. #10
    Join Date
    Jun 2010
    Location
    Winnipeg
    Posts
    816

    Default


    nice build
    really lookin forward to the fancy GCM stuff

Page 1 of 12 1234511 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •